W -1402, W -1403, W-1410 Error Frontier 370

W -1402 Error Frontier 370

Printer temperature adjustment not stabilized.

Laser unit has not reached specified temperature. This error does not output because of specification modification.

 1. Printing is performed immediately after the processor is turned ON. 
2. Abnormal temperature control (for 5 minutes)
3. Perform printing after the LCD display on the processor indicates "Standby" state. 
4. Restart the processor. 

W -1403 Error Frontier 370

Processor temperature adjustment not stabilized.
Processing section has not reached specified temperature. This error does not output because of specification modification. 

W-1410 Error Frontier 370

W-1410 Error occurred during the auto correction. An error occurred during order auto setup.
Error Detection Method
Main control unit: Image processing module returns error
During order auto setup.
Abnormal pre-scanning data, abnormal argument from
Upper module or memory reservation failure
Possible cause
Faulty hard disk or main control unit.
 

Solution
1. Restart the system.
2. Reinstall system software.
3. Replace the main control unit.

Fuji Frontier 370 Error Message W-1224

Error Message W-1224 Frontier 370

If you see error 2529 sos detection failed massage in Fuji frontier 370, you can following below step.

Check Cartridge improperly installed.

Error Detection Method of Error Message W- 1224

240 cartridge motor time-out error (CTB)

Possible cause of Error Message W-1224 

1.    Chucking sensor does not detect chucking within 600 ms because driving load is increased in the nest section.
2.     Poorly connected connector in carrier
3.    Faulty cartridge motor.
4.    Faulty circuit board: SSI20 (cartridge detection), SSH20 (chucking detection), CYC20
5.    Faulty nest section

Investigation Procedure

(1) Check the connector in carrier.
(2) Check the motor operation in the I/O check.
(3) Check the cartridge chucking in the I/O check.
(4) Check the CYC20 circuit board.
(5) Check the load in the nest section.
(6) Check the harness in carrier.

Solution 

(1) Check the connectors in carrier: CYC2,
D456, CYC2A, SSH1, CYC1, M444
(2) Replace the motor.
(3) Replace the SSI20 or SSH20 circuit board.
(4) Replace the CYC20 circuit board.
(5) Replace the nest section.
(6) When the CYC20 circuit board is replaced, follow the procedure given in the manual for replacing the circuit board in the carrier.

Fuji Digital Minilab Frontier 750 Specifications And Feature

Fuji frontier 750 is a medium volume digital lab system with SP500 film scanner and the Frontier LP7500. Fuji Frontier 750 can produces up to 1,180 4R prints per hour from both (film and digital media) sources. Fuji frontier 750 can print paper sizes from 3.5" x 5" to 12" x 36", now every man want high quality print. So every business man’s choice for today's demanding competition quality digital labs. Fuji frontier 750 processing using Fujifilm's Image Intelligence Technology allows for high quality prints for long lasting.
 

Fuji frontier 750 Specifications

Paper widths	3.5", 4", 4.5", 5", 6", 8", 10", 12"
Processor capacity	3R=1309,4R= 1174, 5R=732, 8R= 336, 10R=274, 11x14=201,12x18= 159, 12x36=77
Processor carriage	Single-line, sheet carriage
Printer condition setup	Semi-automatic calibration by built in calibrator
Exposure system	Scanning exposure system using RGB lasers
Index print	Color index print and normal prints can be printed from APS and 135 color negative film in one pass (RGB laser exposure)
Back printing	One 40 or 80 character line of back print information
Processing time	Dry to dry time of 1 minute, 27 seconds (requires Type II paper)
Paper	Optimal performance from Fuji Crystal Archive Type II papers. Utilizes Fujicolor Crystal Archive paper and CP49E rapid processing chemical system featuring hassle free cartridges
Paper magazines	Dual magazine type (Up to four paper magazines can be configured are factory options.)
Power	AC 200-240V (50/60 Hz), single phase 16A
Dimensions	26.9" W x 54.5" L x 66.1" H
Weight	Approximately 882 pounds operational weight

 

Dimensions of Fuji frontier 750 

 Dimensions of Fuji Film Scanner SP-500

Read Another Popular Fuji Frontier
Fuji Digital Minilab Frontier 570 Specification
Download  Fuji Digital Minilab Frontier 750 Feature

Fuji 370 Printer Section Sensor Arrangement Diagram

Printer Section Sensor Diagram of Frontier 370

Need Printer Section Paper Jamming Error Indications Sensor diagram. Here shared a image where try to drawn all sensor of printing section of Fuji frontier 370 machine. I think its help you to finding your faulty sensor, Temperature sensor, micro switch, photoelectric switch etc .