W -1402 Error Frontier 370
Printer temperature adjustment not stabilized.
Laser unit has not reached specified temperature. This error does not output because of specification modification.
Laser unit has not reached specified temperature. This error does not output because of specification modification.
1. Printing is performed immediately after the processor is turned ON.
2. Abnormal temperature control (for 5 minutes)
3. Perform printing after the LCD display on the processor indicates "Standby" state.
4. Restart the processor.
W -1403 Error Frontier 370
Processor temperature adjustment not stabilized.
Processing section has not reached specified temperature. This error does not output because of specification modification.
Processing section has not reached specified temperature. This error does not output because of specification modification.
W-1410 Error Frontier 370
W-1410 Error occurred during the auto correction. An error occurred during order auto setup.
Error Detection Method
Main control unit: Image processing module returns error
During order auto setup.
Abnormal pre-scanning data, abnormal argument from
Upper module or memory reservation failure
Possible cause
Faulty hard disk or main control unit.
Error Detection Method
Main control unit: Image processing module returns error
During order auto setup.
Abnormal pre-scanning data, abnormal argument from
Upper module or memory reservation failure
Possible cause
Faulty hard disk or main control unit.
Solution
1. Restart the system.
2. Reinstall system software.
3. Replace the main control unit.
1. Restart the system.
2. Reinstall system software.
3. Replace the main control unit.
No comments:
Post a Comment