Fuji Frontier 370, Pictures are not dry,Overlap Problem Solve.

Fuji Frontier 370 the pictures are not dry Or Each other Overlap,change the bush but still the same,,
two pictures come crossed over one another and the crossed part is wet Problem Fix
Solve 1.
washed, cleaned and checked all crossover and all the main racks for any wear and tear.
Solve 2.
change the bushes of ur machine's crossover racks ur problem will be solve ,this thing often happens when the bushes get space in there inner side because of roller's shafts.
Solve 3.
Are you using the Fuji Super Conditioner? I have had the problem where the racks got slimey and slippery, then it wouldn't grab the prints until they were overlapped and thick enough to press against the rollers. Feel the racks in the last four tanks. If the rollers are slimey this is your problem. Is the section which is overlapped fully developed. If the image is fine but just stuck it means the problem is in the stabilizer section if the print is not developed or over developed it could be in P1 or P2.
Solve 4.

check your distrubuttion unit. it might be the problem
Solve 5.
Try to print with the processor lid open & see where the prints stick to each other. Problem could be bad gears or rollers on processing rack or turn guide rack.

No comments:

Post a Comment