Fuji Frontier Keyboard Operation Layout and Functions Manual

Fuji Frontier  Keyboard Operation Layout

 Rotates the image 90˚ counterclockwise. Press twice to turn an
image upside down.
• Press the [Shift] and [F1] keys at the same time to rotate all
images 180° counterclockwise.
• Moves the cursor to “Magnification”. Used to perform center
cropping.
• Press the [Shift] and [F2] keys at the same time to turn ON and
OFF the center cropping.
• Moves the cursor to the next frame.
• Press the [Shift] and [F3] keys at the same time to turn ON and
OFF the free cropping.
• Changes the printing mode from “1st Print” to “Re-order”.
• Press the [Shift] and [F4] keys at the same time to change the
image display from six frames to one frame or vice versa.
• Displays the “Sharpness” dialog box.
• Press the [Sift] and [F5] keys at the same time to display the
“Custom Setup No. Selection” dialog box.
• Displays the “Tone Adjustment” dialog box.
• Press the [Shift] and [F6] keys at the same time to proceed to
the image preview mode when variety printing.

•Starts fine scanning/printing.
•Executes as specified.
•Moves control from field to field.
•By pressing on the printing screen, the number of prints can be
entered directly.
•Moves control from frame to frame on the printing screen.
•Moves control from item to item in a menu bar or pull-down
menu.
•Used to adjust zoom magnification.
•Used to increase or decrease number of prints.
Stops printing. Select [Previous Frame], [One Order] or [ALL].
Cancels pre-scanning and feeds out the film.
Displays the sort screen shown at the end of a 1-order printing
operation.
Moves the cursor to the menubar.
Changes film feed mode between “Auto (fully automatic
feeding)”, “Semi (semi-automatic feeding)” or “Manual”.
•Changes print size: FULL (C), PANO (P) and HV (H) in mixed
processing.
•Changes “Frame Type” C Õ P Õ H Õ Auto judge. for IX240 and
FULL Õ PANO Õ HV Õ 135 Half Õ Auto judge. for 135 in the
“Scanner Status” dialog box.
Displays the back function key display.
Holds number of prints and printing conditions.
Displays the “Print Size Selection” dialog box.
Cancels color key correction.
Used for multiple printing. Press this key and enter number with
the numeric keys.

•Density correction keys
•Numeric input keys
•Used to specify the color correction: C (Cyan), M (Magenta),
Y (Yellow).
•Numeric input keys
• Feeds the image to the left at low speed.
• Used to enter number of prints for ten or more copies in the
“Re-order” mode.
Feeds image to the right at low speed.
Returns to the previous frame in one-frame mode.
Displays the next frame in one-frame mode.
•Sets the number of print to “0” (PASS) , causing the cursor to
move to the next frame.
•Resets the number of prints from “0” to the originally specified
number.