What can you do in the Noritsu QSS-3001/3011

Explanation
•The image can be stored to one CD until the capacity of media isfull. (So,
the number of negatives to be stored is not decided.)
(However, up to 5 orders can be seen with the CD-Viewer.)
•DCP cannot be connected.
•EZ-mall cannot be installed.
•The memory stick and SD card are available by replacing the conventional
PC card with Five slots card reader.
•In case of QSS-3011
-CD-R/RW drive and Five slots card reader are standard equipment.
-DVD-RAM is not supported.
Note
•In the illustration, the colors of letter are as follows.
Standard: Black letter
Options: Red letter
(However, in the QSS-3011, the CD-R and CD-RW are in the Black letter.)
•It is possible to process from CT-1.
•12cm CD’s and 8cm CD’s are supported.  Business card CD’s and o
uniquely shaped CD’s are also supported.
•It is now possible to write in multiple sessions. (except CD-R/RW)
Note
•The media capacity of CD is different depending on a maker.
•As for the digital camera media, there is the media with security.  Some of
them cannot process the copyright protected data.
•Even if the media is with security, it can process the data except the
copyright protected data.
•It is now possible to write in multiple sessions.
Note
•The copyright protected data is the encrypted data, and it cannot be created
and edited.
•Follow the attached Operator’s Manual for handling the PC card adapter.
•JPEG 2000 is not available.
•As for the input image format, in case of RGB, 8-bit gradation only is
available.
16-bit gradation or gray scale is not available.
•Media (Windows format) only is available.
•If there is name of image input device maker (Exif data), it is recognized
as the image data from digital camera.  If not, it is recognizedas the image
data from normal media.
•If [Digital image auto correction (Digital camera)] is not used,remove a
check for [Image file selection] screen or [Operator Selections]->
[Corrections] -> [Digital image auto correction (Digital camera)].
•When saving image data taken by digital camera to normal media in the
QSS, the name of image input device maker (Exif data) is overwritten
from ‘maker name of camera’to ‘Noritsu’.  This disables [Digital image
auto correction (Digital camera)] effective when reprinting.
•Refer to Chapter 3 [Front print] for the date of Exif data.
•If you eject the disk from DVD-RAM TYPE2 and use it, writing the data
is impossible.
•In the QSS-3011, DVD-RAM drive is not available.

how do I enter service mode on Noritsu 3001

Do you want to get into the service mode
All it needs is a small .dat file on a floppy, and you are there. You can store the service disc in the  bottom door with the rest of the back up floppies. it is a small file that can be download HERE.

To generate the daily password:
1. Confirm the date of the machine if it is correct (in the windows menu)
2. Take the date in the reverse order, ex. 03/09/2005 will be: 30905002
3. Divide it for 2260 ex. 30905002/2260
4. Take the result: 13674,779646017699115044247787611
5. We will use just the four numbers after the comma/decimal: 7796. It will be our daily password.
6. Hit Function, Menu
7. Then you press F and -1 keys, and it will ask for the password.
8. Enter the password generated above.
service_disk_7862.zip
Daily password generator for service mode:
http://minilabmaster.com/cgi-bin/yabb2/YaBB.pl?action=downloadfile;file=qsspwd.zip

Noritsu 3001 Error 6014 Paper did not rewind

Paper did not rewind. Paper Magazine A

1.Open Front door.

2. Remove the paper jammed in the paper supply unit.

3.Remove This Lach

4.Open This Lock and chang  spring with low tention spring.

5.If you can not find low Tention spring Open this Guerd and get a low Tension Spring you can use it.

How to solve Calibration error (6082-015) with qss-3001

Stap 1.

Before you change to another paper type and /or set another magazine Paper Specification Registration/Setup for the new paper must be executed. One might expect results such as you describe if this procedure is not carried out.

You may also need a copy of the latest version CD Profile Data Ver xx for the QSS3001 to ensure the paper you're trying to set up is loaded (or close to) into the machine data
Stap2.

The best way out of this predicament is to simply recover from say last weeks backup floppy's. Will only take a few minutes.......Pick a date when you know it was good, then start over following the steps in the manual.

You should already have a similar Fuji paper type profile to select from to achieve reaonable results nonetheless

Profile Ver Vol2 -6.65 is here
http://www.zshare.net/download/781278824440052e/
Instructions on how to install follow on from the Paper Specification chapter in you manual.